The device can be connected to multiple numbers of capacitance based wave sensors at a time to monitor and record the wave data simultaneously in a computer.

Having fast response and suitable for model studies, as their presence makes minimum disturbance to the water. They are fixed vertically at different locations, in the wave flume, to sense the wave heights and wave period throughout the direction of waves at different points

: To measure the wave force caused by wave action directly from different location of the water body. The sensor is free from hydrostatic pressure

To measure the load acted on the anchored platforms, which act as wave suppressors etc.

For estimating the force acted on suspended or rigid plates mounted against wave or other forces.

Needed for recording the shift, vibration etc. of model structures of platforms which are subjected to vibration tests

To pick up the water current with sensitivity in all directions.

With uni. direction for measurements from small channels or model tanks

To record the towing load of submerged bodies under towing test.

During testing in towing tanks. The micro-size sensor gives the heave of the towed body without affecting the normal performance of the towed body.

During testing in towing tanks. The micro-size tilt sensor gives the side way tilts and fore-and after tilt of the towed body without affecting the normal performance of the towed body.

Senses the hydrostatic pressure variations instantaneously and provides the water level in high accuracy. The sensor is designed to be free from atmospheric pressure variations

To measure the run up during wave touching the shore or break water. The sensor can be aligned to the waves and once the waves start moving across the sensor, the run up will be displayed on a computer screen and recorded in the computer simultaneously. The information is presented as distance in the scale of cms. or mm. with respect to time. The run up meter also consists of a capacitance wave sensor, to present the data with respect to wave received. The equipment comes with two different type of sensors, to be used for different terrain.
a. Strip sensor.
b. Rod sensor.

Direct reading from deeper waters of rivers, for measurement of water current and its direction. Consisting of under water probe and electronic meter, both connected by cable.